Hotpress-turbo
| DIAMETER | SEGMENT(mm) | SEGMENTED NUMBER | BORE(mm) | ||
| (inch) | (mm) | height | thickness | ||
| 4" | 105 | 8 | 2.0 | / | 20 |
| 4.5" | 115 | 8 | 2.0 | / | 22.23 |
| 5" | 125 | 8 | 2.2 | / | 22.23 |
| 6" | 150 | 8 | 2.4 | / | 22.23 |
| 7" | 180 | 8 | 2.6 | / | 22.23 |
| 9" | 230 | 8 | 2.6/2.8 | / | 25.4 |
| 12" | 300 | 8 | 2.8 | / | 25.4 |
| 14" | 350 | 8 | 3.2 | / | 25.4 |
Safety reminder: Always match the blade diameter, arbor size and printed max RPM with your machine before installation.
Product Advantages
Balanced Speed With Improved Cut-Edge Quality
You get faster material removal compared to regular continuous-rim blades, while delivering cleaner cut edges with reduced chipping on stone, brick and compatible tile workpieces. Less secondary trimming work is required for most construction-site cutting assignments.
Longer Continuous Cutting Runs On Mixed-Material Jobs
Better debris clearance and improved heat exchange allow longer cutting cycles before you need to pause for cooling or chip clearing. This keeps workflow steady when switching between concrete, block and stone on mixed-material projects.
Flexible Multi-Material Job-Site Compatibility
One blade handles a broad set of common construction-site materials including concrete, brick, block, natural stone and suitable tile. It reduces frequent blade swapping for mixed-workload tasks and helps control overall consumable spending.
Key Features
X-Shaped Turbo Segment Design
The X-shaped turbo segment combines an open cutting profile with optimized diamond exposure. This special geometry creates extra airflow and chip-escape channels around the cutting zone. It improves debris removal and heat exchange during operation, helping keep consistent cutting behaviour for masonry, stone and tile-related workloads.
Hot-Pressed Sintered Diamond Segments
Industrial-grade hot-pressed sintered diamond segments deliver stable diamond retention and balanced wear performance for masonry-focused cutting tasks.
Applications
Concrete Cutting
General-purpose cutting for plain concrete, expansion-joint trimming and construction-site concrete modification work.
Brick & Block Cutting
Cutting clay brick, concrete block and various masonry units for renovation and building-site assignments.
Natural Stone Cutting
Trimming and sizing construction-grade natural stone for hard-scape and general building-stone processing.
Compatible Tile Cutting
Suitable for standard-hard ceramic tile where balanced speed and reasonably clean edges are needed; not for high-end fragile porcelain.
Why Choose Our X Turbo Diamond Blades
X-Pattern Segment Tuned For Mixed-Material Jobsites
This X-turbo series is purpose-built for contractors who regularly switch between concrete, masonry, stone and suitable tile. The X-segment geometry is optimized for real-world mixed-material site conditions instead of one-task-only blade design.
Batch-Level Functional Inspection
Every production batch undergoes dimension inspection plus high-speed sampling testing. We check rim integrity, segment bonding and cutting-related performance indicators before goods are packed for export.
Complete Contractor-Oriented Size Line-Up
Stock covers popular job-site sizes ranging from 4-inch through 14-inch, covering small angle-grinder tasks up to larger masonry-saw cutting work.
FAQ
Q: What is an X-turbo diamond blade?
A: An X-turbo diamond blade features specially-shaped X-pattern turbo segments. The X-form creates extra airflow and chip-escape channels, improving heat dissipation and debris evacuation compared with conventional standard-turbo blades, for balanced speed and cut quality on masonry-related materials.
Q: What materials can an X-turbo diamond blade cut?
A: It works well for plain concrete, clay brick, concrete block, construction-grade natural stone and compatible standard ceramic tile. It is not suitable for heavy rebar-reinforced concrete or ultra-fragile porcelain tile. Pick our reinforced-turbo for reinforced concrete and continuous-rim blade for chip-critical porcelain.
Q: Is the X-turbo blade suitable for wet-cutting and dry-cutting?
A: It supports dry or wet cutting depending on the exact blade configuration. For heavy continuous dry-cut runs, follow equipment guidelines and take periodic cool-down intervals to extend overall blade service life.
Q: Can it be used with an angle grinder?
A: Yes, it fits compatible hand-held angle grinders. Always double-check blade diameter, arbor bore size and machine max RPM before installation. It also works with masonry saws and handheld cut-off machines with matching specs.
Q: What is the difference between an X-turbo blade and a standard turbo blade?
A: X-turbo adopts X-shaped patterned segments with additional chip-escape and airflow passages. It delivers improved debris removal and heat exchange during extended cutting cycles. Standard turbo blades use regular wave-turbo rims, more focused on general-purpose masonry cutting without this extra X-pattern cooling-and-evacuation benefit.
Q: Does this blade meet EN 13236 requirements?
A: This series is designed to meet EN 13236 requirements for diamond cutting tools. Relevant documentation can be provided upon buyer request.
Closing Text
Whether you source X-turbo diamond blades for general-purpose construction contractors, mixed-material renovation crews, masonry workshops or wholesale hardware distribution, we supply a complete size lineup together with flexible OEM custom-packaging solutions. Reach out for datasheets, jobsite test samples, quotations and bulk-order support.
Hot Tags
X Turbo Diamond Blade, X-turbo diamond saw blade, concrete cutting blade, brick & masonry diamond blade, general-purpose stone cutting blade, hot-pressed X-turbo blade, China X Turbo Diamond Blade manufacturers, suppliers
our factory
Hot Tags: X Turbo Diamond Blade, China X Turbo Diamond Blade manufacturers, suppliers, turbo diamond saw blade, Continuous Rim Saw Blades, diamond carbide blade, coldpress and hotpress diamond blades, segmented saw blade, Rim Blade For Porcelain And Ceramic